High Quality for Alloy Custom Wheels - LONG MAG W/ATTACHED WASHER 1.85’’ Tall 7/8’’ HEX – Fortune
High Quality for Alloy Custom Wheels - LONG MAG W/ATTACHED WASHER 1.85’’ Tall 7/8’’ HEX – Fortune Detail:
Product Details
● 7/8’’ HEX
● 1.85’’ Overall Length
● Flat seat
● Durable construction
● 14×1.50mm Thread Size
Warning
It is strongly recommended to professionally install this type of nut. Failure to install the correct hardware may be a safety hazard and may cause the wheel/tyre assembly to loosen or fall off when the vehicle is moving on the road. Be sure to rotate 5-7 times before tightening.
Is excessive tightening of lug nuts harmful?
How the lug nut is tightened is very important. Too tight and too tight can cause problems. So, yes, it’s not good to over tighten the lug nut. Excessively tightened lug nuts can peel threads, damage wheels, damage brake discs, and may clip wheel bolts. However, insufficient tightening of lug nuts can cause them to become loose, with disastrous results.
Therefore, do not screw the lug nut too tight or too tight. Make sure you know exactly how much torque they require. Or, if in doubt, consult a certified professional for help in installing or tightening them for you.
Product detail pictures:
Related Product Guide:
We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for High Quality for Alloy Custom Wheels - LONG MAG W/ATTACHED WASHER 1.85’’ Tall 7/8’’ HEX – Fortune , The product will supply to all over the world, such as: Bandung, Kuwait, Kazakhstan, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Odelia from Turkey - 2018.02.12 14:52
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Erin from Montreal - 2017.11.20 15:58
