Definition:
Tire changer, also known as ripping machine, tire disassembly machine. Make the process of vehicle maintenance can be more convenient and smooth tire removal, tire removal of a wide range of pneumatic and hydraulic type of two. The most commonly used is pneumatic tire dismantling machine.
Classification:
By Power type:
Pneumatic tire remover, hydraulic tire remover
By type of use:
Motorcycle special tire unloader, car special tire unloader, truck special tire unloader, engineering vehicle special tire unloader
Structure:
1, the main engine table: the tire is mainly in this table was removed, mainly plays the role of placing the tire, rotation and so on.
2, separation arm: in the tire on the side of the machine, is mainly used to separate the tire and rim, is the smooth tire removal.
3, inflation and deflation device: the main role of the tire to blow off good for inflation or disassembly, in addition to measuring the pressure of the barometer. The average tire is at about 2.2 atmospheres. That's.2 mpa.
4, Pedals: there are three pedals under the tire remover, which act as a clockwise and counterclockwise rotary switch, a detachable tighten switch, and a detachable Rim and tire switch.
5, lubricant: is advantageous to the tire disassembly, reduces the damage in the tire disassembly pile process, causes the tire disassembly to complete the work better. The Compressed air interface
Practice:
1. The power supply of the tire machine must be in the normal state, and the power supply must be in the closed position under the non-working state. The air pressure of the inner machine is at normal pressure, and the air duct is not connected under the non-working condition.
2. Check the tire frame for distortion, air leakage and cracks before changing the tire.
3. Unscrew the air nozzle to release the tire pressure, put the tire in the middle of the compressor arm, the operation of the compressor arm so that the tire on both sides of the wheel frame and separation.
4. Operate all switches for reverse tyre removal.
5, new tires on the tire Peugeot upward, the operation of the switch on the tire. The switches are placed in the closed position after assembly.
Post time: Mar-28-2023