Dynamic balance of tire：
The lead block installed on the automobile tire, also called the wheel weight, is an indispensable part of the automobile tire. The main purpose of installing the wheel weight on the tire is to prevent the tire from vibrating at high speed, affect the normal operation of vehicles. This is what we often call tire dynamic balance.
The role of the wheel weight：
The tire balancer is the counterweight component installed on the wheel of a vehicle. It is to ensure that the wheels in the high-speed rotation, to maintain a balanced state, so that the vehicle driving stability, high comfort of the driver. Installation is divided into two ways, one attached to the inner ring of the wheel, one is hung outside the rim of the outer edge. The main role of the wheel weight is to keep the wheel in high-speed rotation in the case of dynamic balan
Dynamic balance calibration process:
The wheels of a car are made up of tyres , rims, and some accessories. However, due to the production process, so that the overall quality of the distribution of the parts can not be very uniform. When the wheel of the car rotates at high speed, it will form a dynamic imbalance state, causing the vehicle in motion wheel jitter, steering wheel vibration phenomenon. In order to avoid this phenomenon or eliminate the phenomenon has occurred, it is necessary to make the wheel in the dynamic situation by increasing the method of weight, so that the wheel correction of the balance of the various edge parts. The process of this correction is called wheel dynamic balancing.
There are several ways to adjust the wheel weight:
Generally, the wheel weights will not fall off. Normally, when we need to adjust the wheel weights, most of them will be done after we have punctured the tires and repaired the tires. Strictly speaking, as long as the tires are removed, we have to do dynamic balance, for example, if you have a new tire or a tire patch, you have to do dynamic balance. At this point, you use a balancing machine to test the balance of the wheel hub under moving conditions, use a counterweight at an unbalance point, and change the tire in place during normal times, our common models are all front-wheel drive models at present. The front wheel load is greater than the rear wheel. After a certain range of driving, there will be differences in the degree of fatigue and wear of the tires at different parts of the car, therefore, according to the number of miles to travel, or road conditions in a timely manner for tire transposition, at this time also need to adjust the wheel weight.
What are the consequences of an unbalanced wheel?
The tire wheel weight is not only helpful to extend the service life of the tire and the normal performance of the vehicle, but also helpful to the safety of the driver's life. Uneven tire movement will cause irregular tire wear and unnecessary wear of vehicle suspension system, and uneven tire driving on the road will also cause vehicle bumps, resulting in driving fatigue.
Post time: Oct-24-2022