Tire Repair Kits Series Wheel Tyre Repair Accessroies All In One
Feature
● Easy and quick to repair punctures for all tubeless tires on most vehicles, no need to remove tires from rim.
● Hardened steel spiral rasp and insert needle with sandblasted finish for durability.
● T-handle design is ergonomic, providing you greater turning power and offering a more comfortable working experience when using it.
● The outer packaging can be customized according to customer needs.
Proper Use
1.Remove any puncturing objects.
2.Insert rasp tool into hole and slide up and down to roughen and clean inside of hole.
3.Remove plug material from protective backing and insert into eye of needle, and coat with rubber cement.
4.Insert with plug centered in the eye of the needle into puncture until plug is pushed approximately 2/3 of the way in.
5.Pull needle straight out with a rapid motion, do not twist needle while puling out.
Cut off excess plug material flush with the tire tread.
6.Re-inflate tire to recommended pressure and test for air leaks by applying a few drops of soapy water to plugged area, if bubbles appear, repeat the process.
Warning
This repair kit is only suitable for emergency tire repairs to enable vehicles to be driven to a service center where proper repairs can be made to the tire. Not intended for use for major tire damage. Radial ply passenger car tires may only be repaired in the tread area. No repairs are permitted on the bead, sidewall, or shoulder area of the tire. Extreme caution should be used while using tools to prevent injury. Eye protection should be worn while repairing tire.
Model Specification
|
KT-1 |
KT-2 |
KT-3 |
KT-4 |
 |
 |
 |
 |
| ·1pc plastic T handle needle ·1pcs plastic handle spiral probe ·3pcs 4' cold-mending rubber strip ·1pcs rubber cement |
·1pc plastic straight handle needle ·1pcs plastic straight handle spiral probe ·5pcs 4' cold-mending rubber strip |
·1pc plastic T handle needle |
·1pc plastic big L handle needle |
